Making of a Florence Leather Box

Florence Leather Boxes are usually used for keeping various small items like jewelery, cigar and so on. These hand crafted box have the attractiveness to catch the eye and it's really easy to make one. A mold is used to give the shape of of the box and wax finish to give the slick and shiny look. We can use other decorative materials like stones or can use brush paints to give a elegant look to the final product.

Materials and Tools for Florence Leather Box:

  1. Mold: A mold is required for conforming the shape of the box. Wooden molds are preferred for this box as it is easy to handle and comparatively cheap in price.
  2. Leather: Vegetable tanned leathers are preferred for Florence Leather Box construction.
  3. Adhesive: Water base adhesives are preferred.
  4. Others: Different finishing and decorative materials depending on your design.

READMORE
 

Studies on The Effect of Various Kind of Protin Binder to Produce High Quality Glaze Kid Leather

Glaze kid leather is a light fine high-class shoe upper leather. Principle of glaze kid leather is designed depending its. Like, full in substance, tine, smooth, lightly, glossy soft to feel, resilient, and non-stretchy etc, and also from, its physical quality requirements. On the whole its principle can be summarized in the following way.

Goat skin has length 70-90 cm without any defect and disease may be chosen for glaze kid leather. Soaking is done in as usual manner, prolonged soaking is avoided as far as possible, because it may loose hide substance though, and bacteria attack.

Liming is sharp and not very prolonged. Unhairing by painting is usually done because it keeps the goat hair unaffected, which is an important by product of glaze kid leather. After painting pelts are also impedes in flesh lime liquor with certain quality of sharpening agent. After liming, sharp declining and bedding is done. After deliming and bating pelts should be flaccid, silky grain, clean and should lie in any position in which it is kept.

Cr – attaining can be done following both single and double bath process, but best known process according to the practice of Dr.belaveky’s is the skins are treated with chrome alum and dichromate in the same bath to which, after some time, hypo and acid are added. Liquor of anning should not mask.

Neutralization should done with mild alkalis and pH should be near scout 4.8. it will be better if we can avoid neutralizing syntax. Retaining is carried out in a way that there in no surface deposition.

Direct dyes have been found to have good affinity for chrome leather, acid dyes are also need. Basic dye is used to increase brilliancy in the toping. It must note contain any kind fat or oils to its surface and fat contain should not exceed 6-8%. Mainly used synthetic and semi-synthetic fat because sulphited fats are highly penetrative and make leather too soft and natural bats have very poor fixing power. So may come out on pressure. Finishing is very vital in glaze kid leather. It is essential to use smallest possible quality of pigment finish to preserve the natural grain of goatskins and to impart smooth and soft feel. It should be resistant to dry and wet rubbing and also key test should not break the finish film until the it is cracked by key test, in season coats, now-a days caseins based water pigment finishes employed, smooth grain. Top coat, protein binders, poly amide etc, used. Fixing is done by HCHO.

Protein binder has very good effect upon glaze kid leather. It can cover most of the type of defect of the grain. Protein are insoluble in water but soluble in organic solvent and are opaque. Protein has very low binding effect. So it need to mix with wax emulsion and polyurethane impart good gloss on the leather. But if there were some resin it will destroy the protein binder capacity. After completing various type of testing it is found the finished glace kid leather has made in fine quality and in Bangladesh we can make glace kid leather which will not be expensive for us and it will not take more money to produce high quality glazed kid leather as export quality.


Click to Download The Full PDF Version of This Project Paper
READMORE
 

Studies on The Manufacturing Procedure of Hand Gloves

A Hand Glove (came from Old English glof) is defined as a covering for the hand with an individual sheath for each of the fingers and the thumb. This definition includes gloves with partial coverings for the fingers and thumb, such as bicycle gloves. Gloves have separate sheaths or openings for each finger and the thumb; if there is an opening but no covering sheath for each finger they are called "fingerless gloves". Fingerless gloves with one large opening rather than individual openings for each finger are sometimes called gauntlets. Glove which cover the entire, hand butt do not have separate finger openings or sheaths are called mittens.

Today's world is very much fashionable and also sincere about their safety. So, to protect the hand from frost and damage in riding bike, there is no alternative of using safety gloves. Glove making is a little bit difficult I think. Sometimes it needs some heavy machinery to make quality gloves. Bangladesh could have a good prospect, if we invest and make proper utilize of them.


Click to Download The Full Version of This Project Paper
READMORE
 

Studies on The Production of Crackle Finished Leather

Crackle Finished Leather

The Art of Crackle Finish Leather

Crackle finish is an interesting finish that gives the appearance of age on the surface of painted pieces. This finish uses a commercial product and requires two colors of paint – one for the undertones and the other for the top.

A crackle finish, method of forming a crackle finish and a kit for forming a crackle finish. The crackle finish includes a base coat of latex paint or stain on a surface to be treated. A crackle coating is applied over the base coat and dried to tack dry or completely dried. A latex wood filler is applied over the crackle medium. As the latex wood filler dries, it forms islands or domains separated by cracks or valleys revealing glimpses of the underlying base coat.

A crackle glaze or varnish is a finish which creates a crackled effect. Many people use crackle glazes for antiquing, because peeling, crackled paint has an old-fashioned look which goes especially well with restored furniture. Crackle glazes can be used on a wide range of things including pottery, furniture, picture frames, and even walls. A number of craft stores sell materials for crackle glazing, and you can also accomplish the effect with a few supplies you probably already have around the house.

Crackle Finish- The Basic Techniques:

When a crackle finish is made, one color is laid down as a base coat and allowed to dry before a crackling medium is painted over it. Once this medium dries, another coat of color is applied, and cracks and peels start to appear almost immediately. To seal a crackle glaze, a clear varnish or polyurethane sealer can be used. This sealer also halts the crackling process so that the second layer of color doesn't flake off entirely.

The crackle glaze effect is sometimes called craqueleure, and in fine art, it is sometimes used as a tool to date artworks and establish their provenance. Forgers spend lifetimes mastering the art of a properly crackled final layer of paint in the hopes that their works will pass muster by art inspectors; a dedicated forger may infuse a craqueleure with dust and particulates from an old piece of art from the right region in case an art inspector decides to chemically analyze the finish.


Click to Download The Full PDF Version of This Project Paper
READMORE
 

Studies on The Production of Football Leather from Cow Hide

Football Leather - All You Need to Know

Modern worldwide leather market is now a days very fond of football leather. Finished leather is also an intermediate product. Which serves as a raw material for finished leather is therefore, fashion driven, requiring more responsiveness to the market, whereas crust leather is more a commodity type product. Since 1990-91, Bangladesh have started exporting footwear and other leather goods. Bangladesh currently export leather footwear to Europe and Japan.
Leathers used for footballs are mainly chrome tanned leathers that have not been retanned or only lightly retanned in thickness of 2.5 – 3.0 mm. But generally ‘Football leather’ is not used for footballs  exclusively as it’s name might imply, but it is used for making the outer coverings for the football, the volleyball, the water polo ball, the rugby ball and many other balls of a similar nature.

Characteristic Properties of Football Leather :
  1. Football leather must have high degree of resistance to the penetration of water. (great extent of water repellency)
  2. It should have high tensile strength.
  3. It should have high stitch tear strength.
  4. It should be non-stretchy.
  5. It should be non-elastic.
  6. It should have good abrasive resistance.
  7. It should have perfect fastness properties.
  8. Its fibre structure should have low angle of weave.
  9. The void space of the leather should be reduced filling with hard materials and its capillary action should be minimum.
  10. It should have tightness and its elongation must not be more than 4%.
  11. It should be thick (i.e. 2.1 mm-2.3 mm)
  12. It should be resistant on inert in acid alkaline medium.
Principles of Football Leather Production

The Thick butt portion of cow hides are taken for making football leather. To get various desirable physical properties special care should be taken from soaking to finishing during manufacture.

Proper soaking is done with preservative. Liming is accomplished in such a way that less interfibrillary substances are removed. (i.e. Sharp liming). For high strength properties excessive swelling and splitting of the pelt should be avoided. Delimiting is done just after fleshing and without batting it is pickled.

For high strength and low stretchiness, it is tanned with high percentage of unmasked chrome and properly rechroming is done with chrome syntan to get more fullness. It is neutralized with Sodium (Na) or Potassium (K)-salts of organic acid for non-stretchiness and inertness.

Water-proofing fat liquor is used in fatliquoring with raw oil of high viscosity. After fat liquoring, chrome caping operation will be done with self basifying chrome. It is dyed with full penetrative dye. Then it is finally dried under maximum stretched condition in all direction. In finishing surface of football leather should be coated with water proofing agent in a thin finish film.

As production capacity in finished leather and leather goods is developed in Bangladesh, new jobs will be acquired, and markets will be accessed. In standard quality specification, thickness of football leather is min. 2mm. The Europe, Australian and Indian cow hides are generally thick. So, it is easier to keep the thickness 2mm. But in our country’s cow hide quality is not good for many reasons.


Click to Download The Full PDF Version of This Project Paper
READMORE
 

Production Procedure of Men's Shoulder Bag

Till date women were recognized with the tag of most ordered beings on the planet but, now men are also queuing up for this distinction. Like women, men also want to carry their stuff in an organized manner. From cell phones to laptops, they want to keep everything in the most organized manner; hence, many companies have introduced lines of amazing men’s shoulder bag. Made of various materials, these bags are wonderfully meeting with their demands.

Any man of fashion knows that bags have become a necessary tool and style accessory. No longer seen as solely a woman’s item, men’s bags are masculine, attractive and ideal additions to any contemporary wardrobe. If you would like to dabble in the wide world of men's shoulder bag, but don’t quite know which one would suit your needs best, heed this advice: Stick with a classic type of men's shoulder bag, and you can’t go wrong.

Professionals looking for ways in which to carry necessary items in a compact and organized manner will find these bags to be the perfect answer to their prayers. The polished black colors of these bags are an additional bonus as they go so very well with a corporate image.
READMORE